40cm x 50cm Custom DTF Gang Sheet

This versatile size allows you to place multiple designs on one sheet, saving you both time and money without compromising on quality. Ideal for businesses looking to streamline their printing process, our gang sheets are printed using top-of-the-line DTF technology for vibrant, long-lasting results. Just pop your designs onto the sheet and get more bang for your buck!

High-Quality & Versatile: Create detailed, multi-coloured designs with the highest quality machinery, inks and film.

User-Friendly: Though these are professional-grade transfers, they’re designed with simplicity in mind, making them accessible for everyone.

Affordable Excellence: High quality doesn’t have to break the bank. Our transfers offer a cost-effective solution for all, delivering top-notch quality without the hefty price tag, making them an ideal choice for both commercial brands and individuals keen on personalising their clothing.

Longevity is Key: The premium DTF inks and film ensure that your designs don’t fade or wear easily.

Beginner-Friendly: No weeding means easier application, even for novices!

Important Tips to get great results!

What we see is what is printed. Make sure backgrounds are removed, and don’t forget to check the enclosed space of letters if your design has text. If you’re using our File Builder, use the +/- buttons at the top right to zoom in for a closer look, and the transparency grid toggle at the bottom to change the background to different colours, which can help you identify any area’s that may still contain backgrounds that you don’t want printed.

Check for lines that are too thin. These could be fine lines in graphics which have no background, lines that taper to a fine point or even the fine elements of certain fonts. Any printed elements must be at least 0.5mm thick to ensure enough ink and adhesive can be applied during the production process.

Be mindful of semi-transparent elements. Design elements that fade from a solid colour to transparent, or have a semi-transparent ‘glow’ around the edges can print inconsistently. Avoid these elements if possible, otherwise minimise the effect by reducing the level of transparency. Ordering a sample to test is recommended if incorporating these elements in your designs is a must.

Use large, high resolution images. Unless your artwork is vectorised, increasing the size of an image will result in reduced quality – things like blurry-ness, blotchy colours and jagged curves.  Images should be a minimum of 300dpi to ensure crisp clear results. If you see a triangle with ! this is warning you that your resolution is too low and may result in a poorer quality print.

Don’t draw outside the lines. If you’re using our File Editor, the maximum size of your print is already setup when you open the file editor from the product page of the print you wish to purchase. If you’ve pre-prepared your own sheet to upload, make sure the dimensions of the print are not greater than the size of the print you are purchasing.

We’re here to help! If in any doubt please call and we will talk you through setting this up.

Same Day Dispatch for orders received before 12:00pm is not guaranteed for DTF transfers due to file preparation. (but we try our best and often succeed 👊)

Pressing Instructions:

Set the Heat Press: Preheat your heat press to 150°C.

Prepare the Garment: Press the garment for 5 seconds to remove any wrinkles and moisture.

Prepare the Transfer: Position the DTF transfer, ensuring it is aligned correctly. Cover with parchment/baking paper

Press the Transfer: Apply medium pressure and press for 12-15 seconds.

Cool and Peel: Allow the transfer to cool until it is just warm before peeling it off.

2nd Press: Place parchment paper over the design and repress for an additional 7-10 seconds.

NOTE: Times and temps can vary with fabric type. For 100% Polyester / Artificial Fibres, use a lower temperature first of 140°C for 8-10 seconds, and increase slightly if needed to minimise scorch marks.