Heart Sublimation LED Lamp
Printable blank material: Sublimation coated acrylic
Colour: white frosted panel for sublimation printing (do not mirror image)
Size: 15cm x 15cm approx
1 x Light lamp base (RGB Colour modes)
1 x USB power cable (wall plug is required but NOT included) with battery compartment (requires 3 x AA batteries, not included)
1 x Remote (requires 1 x CR2023 button battery, not included)
Pressing Instructions (for a standard heat press, easy press style is not recommended but if these are used times and temps will vary)
- Temperature 190 degrees Celcuis
- Time 120 seconds.
- Light to Medium Pressure
- Make sure your image is NOT mirrored as your pressing to the reverse of the lamp.
- Remove the protective film on both sides of acrylic item.
- Remove immediately from press once finished, the acrylic will feel very soft and pliable, then place on a flat surface and put a heavy item on top to stop the acrylic from warping while it cools down.
- Once cooled you can then remove the paper and place into the lamp base.
Can also be used with adhesive vinyls
Also available in square and round shape.