Foam Flex 3D Vivid Flex Heat Transfer Vinyl A4 sheets – 2 Colours


Foam Flex 3D Vivid Flex Heat Transfer Vinyl A4 sheets – 2 Colours

Vivid Flex heat transfer vinyl (i.e. T-shirt vinyl, Iron-on vinyl) comes with a heat activated adhesive on one side. The other side (which will be the exposed side upon application has a clear carrier sheet that provides a way to keep everything intact until application. All cuts will need to be mirrored (flipped) as you are cutting it from the reverse side. Vivid Flex heat transfer vinyl is compatible with all personal hobby and craft cutters and can be used on many blank products including shirts, hats, shoes, bags or most anything that can withstand the application of heat.

Also available in 300mm x 1m rolls


  • Size: A4 (210mm x 297mm)
  • Heat Press Application: Preheat 3 seconds, Apply firm pressure at 150/160 °c for 10 seconds
  • Iron Application: Preheat 3 second, Wool/Cotton Settings, Iron the entire design for 30 seconds Best results
  • Peel: Hot to Warm (application tape will generally lift itsefl when the vinyl begins to puff up)
  • Layering: Possible when used as the final layer to give the 3D effect
  • Adheres to all materials except nylon
  • Finish: 3D foam design (thick, may need a 2mm Silhouette blade or double cut, best to perform a cut test first)that is best applied with a traditional (not an iron/easy press) heat press to get the best results as heavy pressure will give the best finish
  • Washing Guide: Flip inside out, cold wash and hang dry
  • Compatible with all craft cutters such as: Silhouette Cameo, Portrait, Curio, Cricut-all models, Brother Scan and Cut, Xyron, Craft ROBO, Graphtec, P-Cut, Roland, Janome etc

Additional information

Select Colour

Black, White