Add to cart
Vivid Flex HTV 5 x 21cm wide by 1m lengths mixed Patterned Heat Transfer Vinyl rolls mixed colours $55.00 Original price was: $55.00.$25.00Current price is: $25.00.
Galaxy Hobby Press Pro Heat Press – A4 size – Green Hobby Pro $495.00 Original price was: $495.00.$245.00Current price is: $245.00.
Sale!

SALE Patterned Vivid Flex Heat Transfer Vinyl 500mm wide Rolls

$10.00

SALE Patterned Vivid Flex Heat Transfer Vinyl 500mm wide Rolls $10.00

Patterned Vivid Flex Heat Transfer Vinyl 500mm wide Rolls- stock clear out! SALE

Vivid Flex heat transfer vinyl (i.e. T-shirt vinyl, Iron-on vinyl) comes with a heat activated adhesive on one side. The other side (which will be the exposed side upon application has a clear carrier sheet that provides a way to keep everything intact until application. All cuts will need to be mirrored (flipped) as you are cutting it from the reverse side. Vivid Flex heat transfer vinyl is compatible with all personal hobby and craft cutters and can be used on many blank products including shirts, hats, shoes, bags or most anything that can withstand the application of heat.

Also available in A4 sheet size.

Features

  • Size: 500mm wide lengths
  • Washing Guide: Flip inside out, cold wash and hang dry
  • Compatible with all craft cutters such as: Silhouette Cameo, Portrait, Curio, Cricut-all models, Brother Scan and Cut, Xyron, Craft ROBO, Graphtec, P-Cut, Roland, Janome etc
  • Vinyl width tolerance -/+ 3-5mm
  • Please note while we ensure to get the exact same vinyl colours each time please be aware that vinyl shades can change from time to time due to slight variances between batches, much like fabric colours can vary between rolls/batches.

Material Specification:

  • PET Composition
  • Thickness:145 Microns / 5.7 Mils (Please make sure plotter is capable of cutting such thickness)
  • Heat pressure sensitive backing
  • Special Design Finish

Application Instruction (Home Iron)

  • Cut in reverse
  • Weed excess material
  • Set iron dial between Cotton and Linen
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure (do not slide iron)
  • Press each section of design for 15-20 seconds
  • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
  • let it cool for about 30-45 seconds and then gently peel back the clear plastic until it is completely removed.
  • Layering: Possible with reduced times and temps on start layers

Application Instructions (Heat Press)

  • Cut in reverse
  • Weed excess material
  • Preheat all fabric prior to pressing for best results
  • Apply design at 160°c for 10-12 seconds
  • Allow the transfer to cool for about 20 seconds and then gently peel back the clear plastic until it is completely removed.
  • Layering: Possible with reduced times and temps on start layers

Applies to:

  • 100% Cotton
  • Poly / Cotton Blends
  • 100% Polyester
  • Leather

Washing/Care Instructions:

  • Wait 24 hours before 1st wash
  • Cold Machine wash with mild detergent
  • Dry on normal dryer setting
  • Do not bleach or dry clean

Note: Material will be rolled for shipment within a box or cylinder.

  • Images are for display purposes only and colours can vary from screen to screen

Additional information

Patterned HTV

Black and Grey Tie Dye, Blue and Magenta Tie Dye, Blue, Green and Yellow Tie Dye, Feather Print, Flock Cracked Gold and White, Green Camo Print, Grey & Gold Cracked Flock, Orange and Red Tie Dye, Orange, Purple and Yellow Tie Dye, Rainbow Mermaid Print-Black Scale, Rainbow Mermaid Print-White Scale, Scattered Galaxy Print, Silver Swirl, Snow Leopard Print, Solar Blue, Solar Pink, Solar Yellow, Tie Dye Mermaid Print

SKU: VF-P-300-1 Categories: , ,

Related products