DTF Powder 1kg/bag 80-170µm
Formulated for use during Direct to Film (DTG Transfer) printing, Color Prime adhesive powder is a crucial part of any DTF printing workflow. Cover your Direct to Film media with this powder to allow for optimal press. Use for 100% cotton, polyester, nylon, and more!
Features:
- After baking the powder, solid white for more vibrant colors
- Even and regular particles for quality graphics and good adherence
Sizes:
- 1 kg & 20KG
Instructions (for use with DTF Station Warm Peel film):
- Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink)
- Apply hot melt powder evenly and remove the excess powder. Use a Seismo or Miro Shaker unit to apply powder with ease!
- Hover with a heat press to bake the hot melt powder (150-160°C, 5min). Or use a curing oven (125-135°C, 1min).
- Transfer the image by heat press at 130-140°C for 10sec with medium pressure.
- After the first press,
Option 1: Wait for 4-6 seconds and remove the film gently
Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently - Heat press again at 130-140°C 5-10sec with medium pressure to acheive an enhanced, softer hand feel.
WARNING
- Caution: When handling DTF Hot Melt Powder, do not ingest or inhale powder or fumes. Harmful if swallowed. Skin irritations may occur. Avoid contact with skin and eyes. If contact with eyes, rinse with large amounts of water. Wear protective clothing, gear, mask and gloves when handling powder. If allergic reaction persists or accidentally ingested, seek medical help immediately. Ensure a well ventilated environment with air extraction / purification.
1kg bag. After opening store in airtight container and dry.
